Stihl FS 260 C-E
Powerful 2,0kW-brushcutter with ErgoStart (E)
For tough, largescale mowing work. STIHL 1-point anti-vibration system, STIHL ErgoStart, multifunction handle, bikehandle, tool-free handle adjustment, 2-MIX engine, ADVANCE universal harness.
|Power output||2/2,7 kW/bhp|
|Weight 1)||7,7 kg|
|Sound pressure level with plastic tool 2)||101 dB(A)|
|Sound pressure level with metal tool 2)||100 dB(A)|
|Sound power level with metal tool 2)||112 dB(A)|
|Sound power level 2)||113 dB(A)|
|Vibration level, left/right with plastic tool 3)||5,8/5,7 m/s²|
|Vibration level, left/right with metal tool 3)||4,2/4,6 m/s²|
|Total length 4)||168 cm|
|Cutting tool||Brush knife 300-3|
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
ADVANCE universal harness
Extremely ergonomic, comfortable and light. For strength saving, mowing and shredding. Chest belt and tool bag also available.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
Tool free handle adjustment
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Winter setting slide control
It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)
Large fuel tank
The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)
Air filter with long service life
The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)
It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.